DE-BUG CLEAN FUEL UNIT

        

         Ordering Information

The L5000 De-Bug Unit eliminates existing microbial infestations and continually prevents infestations from re-occurring, simply by using the engine or re-circulation system.

If you have bugs in your fuel/ oil you can expect a notable improvement in power, 5%+ reduction* in fuel use and filters will last normal service intervals. Injectors and fuel won't block or corrode because of the diesel bugs.

Ref*: Savings



Specifications

For: Diesel fuel, marine diesel, light oils, gas oil, jet, kerosene.
Engine Ratings:
1,000 to 8,000 Hp

Max Hourly
Flow Rate: 5,000 litres/ hr.
Materials:
  LM24 - marine grade, anti corrosive aluminium alloy.
Weight:
21.5 kilograms.
Size:
375mm wide, 333mm high, 386mm deep.

Port Size: SAE J514 Dash 24  - Straight Thread O-Ring Boss - 1 1/2"
Operating Pressure:
50 psi.
Installation:
Two 16mm mounting holes on the backing flange


Applications:
Turbine and Cylinder engines - Ships,  Locomotives, Power Generation, and fluid treatment applications up to 5,000 litres per hour.   


 
 

Fitting and Operating
The L5000 De-Bug Unit is a one pass system providing systematic elimination of microbial contaminants. Installation is after the water separator and before the primary filter.

Provided the unit is properly fitted, and used, the L5000 De-Bug Unit is guaranteed to significantly reduce microbial decontamination. The L5000 De-Bug Unit is unconditionally guaranteed against manufacturing defects for one year (12 months).

NOTE: Disassembly of magnet stack voids all guarantees and warranties.  

 

Ordering Information

                                                                                      

SAE J514, Straight Thread O-Ring Boss

Dash
Size
Inch
Size
Thread Male
Thread
O.D. mm
Male
Thread
O.D. inches
Female
Thread
I.D. mm
Female
Thread
I.D. inches
2 1/8 5/16-24 7.9 .31 6.9 .27
3 3/16 3/8-24 9.6 .38 8.6 .34
4 1/4 7/16-20 11.2 .44 9.9 .39
5 5/16 1/2-20 12.7 .50 11.4 .45
6 3/8 9/16-18 14.2 .56 12.9 .51
8 1/2 3/4-16 19.0 .75 17.0 .67
10 5/8 7/8-14 22.3 .88 20.3 .80
12 3/4 1 1/16-12 26.9 1.06 24.9 .98
14 7/8 1 3/16-12 30.0 1.18 27.7 1.09
16 1 1 5/16-12 33.3 1.31 31.0 1.22
20 1 1/4 1 5/8-12 41.4 1.63 39.1 1.54
24 1 1/2 1 7/8-12 47.7 1.88 45.5 1.79
32 2 2 ˝-12 63.5 2.50 61.2 2.41

 

Return to Unit Table

Site Map


Member

 

Copyright©1999-2018 Morison & Morison Pty Ltd  A.B.N. 18 079 223 911
 

top of page.JPG (4844 bytes)